Ubiquiti ECS-48-PoE Enterprise Campus 48 PoE Enterprise-grade 48-port Layer 3 Etherlighting PoE+++ Switch
Enterprise-grade 48-port, Layer 3 Etherlighting™ PoE+++ switch with high-capacity 10 GbE RJ45 and 25G SFP28 connections for high availability system design.
Note. 2,150W total PoE availability requires Shared Mode (coming soon). Recommend being paired with Enterprise Campus Aggregation.
Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support.
| Dimensions | 442.4 x 43.7 x 496 mm (17.4 x 1.7 x 19.5") |
| Port Layout |
2.5 GbE RJ45: 16 (All PoE+++) (2.5G/1G/100M/10M) 10 GbE RJ45: 32 (All PoE+++) (10G/5G/2.5G/1G/100M/10M) 25G SFP28: 4 (25G/10G/1G) |
| Max. PoE Output | Up to PoE+++ |
| Total PoE Availability |
200–240V AC Shared Mode: 2,150W 100–120V AC Shared Mode: 1,750W 200–240V AC Redundant Mode: 950W 100–120V AC Redundant Mode: 750W |
| Redundancy | (2) Hot-Swappable PSUs, (4) Hot-Swappable Fans |
| Layer 3 | Yes |
| Form Factor | Rack mount (1U, Full-Depth) |
| Etherlighting™ | Yes |
| Performance | |
| Switching Capacity | 920 Gbps |
| Total Non-Blocking Throughput | 460 Gbps |
| Forwarding Rate | 684 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 128,000 |
| Layer 3 Table Size |
ARP Entries: 128,000 IPv4 Routes: 256,000 |
| Packet Buffer Size | 8 MB |
| Access Lists |
IPv4: 256 MAC: 256 |
| Layer 3 Features | |
| DHCP Server (Local Networks) | Yes |
| DHCP Relay | Yes |
| Inter-VLAN Routing | Yes |
| Static Routing | Yes |
| Layer 2 Features | |
| Supported Features | LACP Port Aggregation, STP & RSTP, QoS (DSCP), Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron), Advanced IGMP Config (Querier, Fast Leave, Router Port), IGMP Snooping, 802.1X Control, MAC-Based ACLs & Device Isolation, DHCP Snooping & Guarding, Egress Rate Limit, Flow Control, Storm Control, Multicast & Broadcast Rate Limiting, MAC Address Blocking, IP-Based ACLs & Network Isolation, MAC-Based Port Restriction, Port Isolation, Port Mirroring, Jumbo Frames, LLDP-MED, Voice VLAN, Loop Protection |
| Hardware | |
| PoE Ports | PoE+++ × 48 |
| Max PoE Wattage per Port |
PoE: 15.4W PoE+: 30W PoE++: 60W PoE+++: 90W |
| Max Power Consumption | 250W (Excluding PoE Output), 2400W (Including PoE Output) |
| Power Method | (2) Universal input, 100–240V AC, 50/60 Hz |
| Power Input Method | (2) AC input, Hot-swappable power modules |
| Power Supply | (2) Hot-swappable AC/DC 1,200W power modules |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet, AR |
| Weight |
9.46 kg (20.9 lb) without mounting brackets 9.56 kg (21.1 lb) with mounting brackets |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 482.6 mm (19") four-post racks (650–1,000 mm depth) |
| LCM Display | 1.3" touchscreen |
| Fan Method | (4) hot-swappable fan modules |
| ESD Protection | Air: +30kV, Contact: +19kV |
| Operating Temperature | -5 to 40C (23 to 104F) |
| Operating Humidity | 10 to 90% noncondensing |
| LEDs | Ethernet, System |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
| Software | |
| Application Requirements | UniFi Network Version 9.0.114 and later |
Products You May Like
Ruijie RG-WS6512, High-Performance Large Campus Wireless Access Controller
D-Link DAP-1530 AC750 Plus Wi-Fi Range Extender
Tenda O1-5G 5GHz 9dBi 11AC 867Mbps Outdoor CPE - 2-pack
Tp-Link EAP670 AX5400 Ceiling Mount WiFi 6 Access Point
Ubiquiti AMY-9M16x2 UISP airMAX 900 MHz,16 dBi, 2x2 Yagi Antenna, 2-Pack
Ubiquiti U6 Mesh Pro Indoor/outdoor WiFi 6 Access Point - U6-Mesh-Pro-EU