Ubiquiti Gate Access Starter Kit - UA-SK-Gate
Control a vehicle gate using the connected Intercom and authorize gate access with License Plate Unlock when paired with a compatible Protect AI camera.
#1: (1) Gate Hub
#2: (1) Intercom
#3: (1) PoE++ adapter
#4: (2) 2-wire PoE extenders
| UA-Hub-Gate | |
|---|---|
| Dimensions | 175 x 126 x 26 mm (6.9 x 5 x 1") |
| Enclosure Material | Polycarbonate |
| Mounting | Din-rail (Included) |
| Networking Interface | (5) 10/100/1000 Base-T |
| Power Method | PoE++ |
| Max. Power Consumption | Without PoE output: 22W With PoE output: 50W |
| PoE Input | 50V DC, 1A |
| PoE Output | PoE passthrough, (4) PoE, 50V DC, Max. 28W |
| Button | (1) Factory-reset |
| Digital Input | Gate exit request, gate position, side door exit request, side door position, emergency |
| Dry Output Relay | (2) Operator: 30V DC, up to 1A (1) Aux: 30V DC, up to 1A |
| Powered Output Relay | Side door lock: 12V DC, up to 1A |
| Operating Environment | Indoor use only with device itself, Outdoor use with waterproof junction box |
| Ambient Operating Temperature | -30 to 60 C (-22 to 104 F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| LEDs | PoE in: Steady white - Pending adoption Steady blue - Adopted, device ready Blinking white/blue - Upgrading firmware PoE out: Off - Not connected/no data link Steady white - Connected and data link on Input terminals: Off - No wire Steady white - Wire connected Blinking white - Active signal Output relays: Off - No wire Steady white - Wire connected Blinking white - Relay triggered |
| UA-Intercom | |
|---|---|
| Dimensions | 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1") |
| Enclosure Material | Aluminum alloy, UV-stabilized polycarbonate, glass |
| Mount Material | Powder-coated stainless steel |
| Mounting | Wall mount, gooseneck adapter (Included) Surface angle, flush mount (Optional) Sunshield kit (Optional) |
| Weatherproofing | IP65 |
| Networking Interface | (1) GbE RJ45 port |
| Connectivity | Bluetooth 4.2, NFC |
| Power Method | PoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported Voltage Range | 48V DC |
| Max. Power Consumption | 13W |
| ESD/EMP Protection | Air: +15kV, Contact: +8kV |
| Sensors | Proximity sensor, ALS sensor |
| Camera | 3264 x 2448, 8 MP (H: 79.4°, V: 97.5°, D: 118.2°) |
| Display | 177 mm (7") diagonal, 1024 x 600, 16:9, capacitive multi-touch, Max 1000 nits |
| Microphone / Speaker | Yes / 4Ω, 2W |
| LEDs | 1 LCM low temp indicator (orange), 1 LED floodlight, 13 Keypad LED backlight |
| Button | (1) Factory-reset |
| NFC Frequency | 13.56 MHz, Read range <30 mm |
| NFC Standards | ISO 14443A/B, 15693 |
| NFC Technology | NFC Tag 1-5, MIFARE Classic/Plus/Ultralight/DESFire |
| Ambient Operating Temperature | Device: -30 to 60C, Display: -25 to 60C |
| Operating Environment | Outdoor use |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| UL 294 Level | Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I |
| PoE Cabling Requirements | Cat5e minimum; 26 AWG for patch cords, 24 AWG for horizontal/riser cable |
| Grade | CAN/ULC-60839-11-1 Grade I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document Number | UA-Intercom, V01 |
| UACC-Extender-2Wire-PoE-Tx/Rx | |
|---|---|
| Dimensions | 40 x 105 x 25 mm (1.6 x 4.1 x 1") |
| Enclosure / Mount Material | Polycarbonate |
| Networking Interface | (1) 10/100 MbE, (1) Homeplug AV |
| Power Method | PoE++ |
| Max. Power Consumption | 3W (Without PoE output) |
| PoE Input | (1) PoE++, 50V DC, Max 1.2A |
| PoE Output | (1) PoE+, 48V DC, 0.72A |
| ESD/EMP Protection | Air: +8kV, Contact: +4kV |
| LEDs | White |
| Ambient Operating Temperature | -10 to 40 C (14 to 104F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| U-PoE++ Adapter | |
|---|---|
| Model | U-PoE++ |
| Dimensions | 106 x 63 x 34 mm (4.2 x 2.5 x 1.3") |
| Output Voltage | 48V DC, 1.25A |
| Gigabit LAN Port | Yes |
| Rated Voltage | 100–240V AC, 50/60Hz |
| Input Current | 1.3A 120V AC, 0.75A 230V AC |
| Inrush Current | <100A peak 120V AC, <200A peak 230V AC |
| Efficiency | 85+% |
| Output Ripple | 1% max. |
| Switching Frequency | 65 kHz |
| Line Regulation | <1% |
| Load Regulation | <3% |
| 4-Pair Powering | Pins 1,2,4,5 (+) and 3,6,7,8 (-) |
| AC Connector | IEC-320 C6 |
| Data In / PoE | RJ45 shielded socket |
| Surge Protection | Difference and common mode |
| Clamping Protection | 11V data, 60V power |
| Max. Surge Discharge | 500A (8/20 μs) power |
| Peak Pulse Current | 36A (10/1000 μs) data |
| Shunt Capacitance | <5 pF data |
| Response Time | <1 ns |
| Power Supply | AC/DC |
| Max. PoE+ Wattage per Port | 60W |
| Ambient Operating Temperature | 0 to 40C (32 to 104F) |
| Storage Temperature | -30 to 70C (-22 to 158F) |
| Ambient Operating Humidity | 10 to 95% noncondensing |
| Certifications | CE, FCC, IC, UL, UKCA, KC, CCC, RoHS |
| Software | UniFi Access: v2.1.5+, UniFi Protect: v4.0.33+ |
Products You May Like
Tp-Link EAP225 V3 AC1350 Wireless Gigabit Ceiling Mount Access Point
Linksys Atlas Pro 6 MX5503 - Dual-Band AX5400 Mesh WiFi 6 System 3-Pack
Ubiquiti U-PRO-MP Access Point Professional Mounting System
Netgear RBK850 AX6000 WiFi Mesh System
Tp-Link TL-WA801N New 300Mbps Wireless N Access Point
Linksys Velop WHW0102 Dual-Band Intelligent Mesh WiFi 5 System 2-Pack