H3C EWP-WA7220-HI-FIT Best price in Dubai UAE
Supports Wi-Fi 7 with 2×2 MIMO and speeds up to 6.453 Gbps.
Features 320 MHz channels, 4096-QAM, MLO, and enhanced OFDMA.
Supports 2.4 GHz, 5 GHz, and 6 GHz frequency bands.
Includes Bluetooth, USB, and PoE-out ports for IoT connectivity.
Supports CloudAP, FitAP, and AnchorAP modes with Cloudnet and AD-Campus management.
Provides AI-powered dynamic power saving and intelligent RF optimization.
Offers WPA2/WPA3 security, rogue device detection, fast roaming, and wireless fault diagnosis.
H3C EWP-WA7220-HI-FIT Buy with Best Price from authorized supplier for H3Cproducts in UAE H3C WA7220-HI – Wi-Fi 7 Dual-Radio High-Performance Access Point Distributor for Africa dsrtech.ae, H3C Dubai
Hardware Specifications
| Weight | 670 g |
| Dimensions (W × D × H) | 220 × 220 × 40 mm (without mounting brackets) |
| Ethernet Interfaces | 1 × 100/1000M/2.5G RJ-45 PoE input; 1 × 100/1000M/2.5G RJ-45 PoE output |
| Console Port | 1 × RJ-45 management console port |
| USB Port | 1 × USB 2.0, 2.5 W |
| PoE Input | IEEE 802.3af/at |
| PoE Output | IEEE 802.3af |
| Local Power Supply | 54 V DC adapter (sold separately) |
| Antenna Type | Built-in omnidirectional antenna |
| Antenna Gain | 6 GHz: 4.4 dBi; 5 GHz: 4.0 dBi; 2.4 GHz: 3.0 dBi. Equivalent gain: 3.1 dBi, 3.2 dBi and 1.9 dBi, respectively |
| Built-in IoT Module | Bluetooth Low Energy (BLE) 5.3 |
| Frequency Bands | 2.4 GHz: 2.400–2.4835 GHz; 5 GHz: 5.150–5.895 GHz; 6 GHz: 5.925–7.125 GHz, subject to regulatory domain |
| Modulation Technology | DSSS, OFDM and OFDMA |
| Modulation Modes | BPSK, QPSK, CCK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM |
| Data Rates | 802.11b: up to 11 Mbps; 802.11a/g: up to 54 Mbps; 802.11n: up to 600 Mbps; 802.11ac: up to 6,933 Mbps; 802.11ax: up to 9,608 Mbps; 802.11be: up to 23,059 Mbps |
| Maximum Transmit Power | 6 GHz: 23 dBm; 5 GHz: 23 dBm; 2.4 GHz: 23 dBm |
| Adjustable Power Granularity | 1 dBm increments |
| Reset Button | Factory reset and Cloud AP/Fit AP mode control |
| Security Slot | Kensington security slot |
| Installation | Wall or ceiling mounting; bracket preinstalled |
| LED Indicators | Yellow, green and blue status LEDs |
| Operating Temperature | –10°C to +50°C |
| Storage Temperature | –40°C to +70°C |
| Humidity | 5%–95%, non-condensing |
| Protection Class | IP41 |
| Surge Protection | 4 kV common-mode |
| Power Consumption | 802.3at: 18.9 W; 802.3af: 13.6 W; DC: 33.9 W maximum |
| Safety Standards | IEC/EN 62368-1, GB 4943.1 |
| EMC Standards | EN 301 489-1/-3/-17, EN 60601-1-2, EN 55032/55035, CISPR 32/35, AS/NZS CISPR32, ICES-003 Issue 7, GB/T 9254.1/9254.2, GB 17625.1/17625.2, IEC/EN 61000-3-2/-3-3 and IEC/EN 61000-4-2/-3/-4/-5/-6/-8/-11 |
| Radio Standards | ETSI EN 300 328, EN 301 893, EN 300 440, EN 303 687, FCC Part 15E |
| RoHS Standards | EN IEC 63000:2018 |
| Health Standards | EN 50385:2017, EN IEC 62311:2020 |
| MTBF (25°C) | 2,379,224 hours |
Software Specifications
| Product Type | Indoor dual-radio Wi-Fi 7 access point supporting IEEE 802.11a/b/g/n/ac/ac Wave 2/ax/be |
| Operating Modes | Fit AP, Cloud AP and Anchor AC |
| Supported Controllers | H3C WX2800X, WX3800X and WX5800X Series Wireless LAN Controllers |
| Radio Configuration | Default dual-radio: 5 GHz 2×2:2 (2.882 Gbps) + 2.4 GHz 2×2:2 (0.689 Gbps); alternative: 6 GHz 2×2:2 (5.765 Gbps) + 2.4 GHz 2×2:2 (0.689 Gbps) |
| Channel Bandwidth | 6 GHz: up to 320 MHz; 5 GHz: up to 160 MHz; 2.4 GHz: up to 40 MHz |
| Maximum Transmission Speed | 6.453 Gbps (6 GHz + 2.4 GHz); 3.57 Gbps (5 GHz + 2.4 GHz) |
| Maximum Clients | 512 listed; source describes 256 clients across each of the stated band combinations. Confirm the intended total limit before publishing. |
| Maximum BSSIDs | 8 per radio |
| Wi-Fi 7 Features | 320 MHz channels, 4096-QAM, Multi-Link Operation (MLO), preamble puncturing, Multi-RU, uplink/downlink MU-MIMO and OFDMA |
| Wi-Fi 6 Features | Target Wake Time (TWT), BSS Coloring, spatial reuse, MU-MIMO and OFDMA |
| WLAN Technologies | A-MPDU, A-MSDU, LDPC, LACP, STBC, DFS, transmit beamforming, cellular coexistence, MRC and CDD/CSD |
| Tunnel Management | CAPWAP, DTLS encryption, IPv4/IPv6, AC discovery, NAT, time synchronization, dual tunnels, PPPoE client and IPsec in Cloud AP mode |
| WLAN Management | Automatic RF adjustment, SSID hiding, client limits, centralized/local/policy forwarding, VLAN binding, user isolation, load balancing, band steering and 802.11k/v/r roaming |
| Additional WLAN Features | Multicast enhancement, BLE/RSSI location, IoT gateway expansion, Mesh, wireless probing, Hotspot 2.0 and Bonjour gateway |
| User Authentication | 802.1X, MAC, Portal, PSK, Private-PSK/PPSK, EAP and social-media authentication in Cloud AP mode |
| EAP Methods | EAP-TLS, EAP-TTLS, MSCHAPv2, PEAP, EAP-FAST, EAP-GTC and EAP-SIM |
| Wireless Security | WPA2, WPA3, OWE, AES, TKIP, WEP40/104, packet and MAC filtering, broadcast suppression, EAD, management frame protection, WIPS and IPSG |
| Layer 2/3 Features | Static/DHCP IP configuration, DHCP server/client/relay, NAT/NAT66, NAT logging, LLDP, STP, IPv4/IPv6 ICMP, ACL, TFTP, FTP and DNS |
| Service Assurance | Remote AP operation, Doctor AP, spectrum analysis, 802.11ax-only access, intelligent bandwidth guarantee, port aggregation, broadcast suppression, weak-signal client blocking, roaming optimization and software recovery |
| QoS | WMM, QoS prioritization and mapping, packet filtering, traffic classification, committed access rate (CAR), user bandwidth management, Air Time Fairness (ATF), Call Admission Control (CAC), SQA and UCC |
| Power Saving | Green AP, U-APSD and Spatial Multiplexing Power Save |
| Management and Maintenance | Web GUI via HTTP/HTTPS, SNMP v1/v2c/v3, MIB, SSH v2, Telnet, FTP/TFTP, CLI, Syslog, secure boot and NETCONF |
| IEEE Standards | 802.11a/b/g/n/ac/ac Wave 2/ax/be, 802.11d/e/h/i/w/u/k/v/r, 802.3af/at/bt, 802.3az and 802.15.1 |
| Wi-Fi Certifications | Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, WMM, WPA, WPA2, WPA3 Enterprise/Personal (SAE) and Enhanced Open (OWE) |











